WriteLog supports presenting the I/Q outputs from the IC-7610 on its Band Map using Icom’s ExtIO_IC7610.dll.
Continue reading “IC-7610 SDR Setup For Band Map”
Category: Band Map SDR
Elecraft K2 SDR setup
The Elecraft K2 moves its IF around based on which band, which mode, and which filter you have selected from its front panel. Each of those variations adds a little complexity to its setup in WriteLog’s SDR wizard.
Continue reading “Elecraft K2 SDR setup”
Elecraft K3 SDR Setup
The Elecraft K3 is a simple rig to setup in WriteLog’s SDR wizard.
Continue reading “Elecraft K3 SDR Setup”
SoftRock Lite II
The SoftRock Lite II, available at http://fivedash.com, is inexpensive, and works well with WriteLog. Build one and connect it to your rig’s IF output, WriteLog can display a panadapter on its Band Maps.
Continue reading “SoftRock Lite II”
Funcubedongle
The funcubedongle, available at http://funcubedongle.com, is easy to setup and works well with WriteLog. Connect one to your rig’s IF output, WriteLog can display a panadapter on its Band Maps.
Support for the RTL-SDR dongle
The RTL-SDR dongle is available for under $30 US. Connect one to the IF on your rig, and WriteLog can display a panadapter on its Band Maps. Continue reading “Support for the RTL-SDR dongle”
Inexpensive panadapter support for WriteLog’s Band Map
If you rig has an IF output on its back panel then you have almost everything you need for WriteLog to superimpose a waterfall display on its Band Map. There is no need to buy an expensive panadapter, and you get packet spots on the same display along with all the detailed customization like horizontal versus vertical orientation and selectable update rates and resolution. Continue reading “Inexpensive panadapter support for WriteLog’s Band Map”